Gibts da auch "unechte"???
|
Text zur Anzeige gekürzt. Gesamten Beitrag anzeigen »
Market Release: Perovskite Stability Demonstrated Dyesol Ltd: Global Leaders in Dye Solar Cell Technology Page 1 of 2 MEDIA RELEASE DYESOL LTD | ASX: DYE | FWB: D5I Perovskite Stability Demonstrated Queanbeyan, 11 May 2015 – Dyesol Limited (ASX: DYE) is pleased to report that a research team headed by Professor Michael Grätzel has achieved 1000 hours of stability under light soaking and more than 2000 hours under temperatures of 80 ºC – 85 ºC. Further, the team has demonstrated outdoor durability of perovskite solar cells in real-world conditions. Professor Michael Grätzel is chairman of Dyesol’s Technology Advisory Board. In the scientific publication in the journal Energy Technology, in an article titled, “Outdoor Performance and Stability under Elevated Temperatures and Long-Term Light Soaking of Triple-Layer Mesoporous Perovskite Photovoltaics”, a team researching at the Center of Nanotechnology, King Abdulaziz University in Jeddah, Saudi Arabia, reported no material loss of power conversion efficiency (PCE) after imposing three critical stability tests. These are tests derived from international standards such as IEC 61646 where cells are subjected to a constant elevated temperature, light soaking, or real-world testing. Outdoor testing, as in these experiments, where very harsh conditions are encountered in the Saudi Arabian desert, is considered to be technologically robust. Stability is critical in establishing the suitability of a technology for warrantable long-life PV products. The team used a cell architecture which matches one of the systems being developed by Dyesol for commercialisation evaluation. Importantly, this architecture eliminates the use of expensive back contact conductors and also eliminates the use of a conventional organic hole-transport-material, such as spiro- OMeTAD. In addition to perovskite, the active materials are TiO 2 and ZrO 2 . Dyesol is working with Cristal in further development of these materials. Dyesol believes the technology applied in these experimental conditions is protected by patents that Dyesol enjoys access to by virtue of its licence conditions with the École Polytechnique Fédérale de Lausanne (EPFL). No competitive technology in the field of perovskites has yet to demonstrate such promising stability results. Dyesol has a commercialisation model focussed on the exploitation of solid-state DSC or Perovskite Solar Cells (PSC). Its principal substrates of choice are glass and steel for building-applied (BAPV) and building-integrated (BIPV) photovoltaic applications. Dyesol has established commercial collaborations in the UK and Turkey, and expects to announce further collaborations in key markets during 2015.
Text zur Anzeige gekürzt. Gesamten Beitrag anzeigen »
Ein erster Schritt --- aber bis selbst zum Prototyp sind noch viele Schritte zu gehen
Und schade auch, dass das alles im EPFl stattfindet und man dazu noch auf einen Beitrag zu einer arabischen Uni verweist. Ich dachte Dyesol hat 50 Mitarbeiter, die auch mal was veröffentlichen würden über ihre eigenen Erfolge.
Und der Test ist zwar ganz nett und auch wichtig, doch sicherlich wieder mit Fingernagel großen Chips durchgeführt (Darüber fehlen leider immer Angaben!). Ich würde diese Test zumindest einmal mit einer Fläche durchgeführt sehen, die man auch als Solarmodul - ohne Brille - erkennt.
Und zudem ist der Test nur ein Test von vielen die erfolgreich durchgeführt werden müssen, damit man Solarmodule für den Outdoor-Bereich mit einer Haltbarkeit und Stabilität von bis zu 25 Jahren ohne größeren Effizienzverluste am Markt positionieren kann.
Siehe dazu:
http://www.energie-experten.org/erneuerbare-energien/photovo…
Das dauert noch --- und selbst 2018 ist ein enger Terminplan dafür. Und der Aktienkurs zeigt es auch: Die frühere Euphorie bei derartigen Ankündigungen ist verflogen.
Abwarten und mal schaun wer der Glaspartner ist/wird --- denn die TKB-Bank hat einen langen Atm und wartet auch noch lange bis zu einer Entscheidung! Dazu siehe:
Auszug aus dem LOI mit der TKB-Bank
The pre-conditions to forming a binding [/b]funding agreement include the establishment of a 50/50 joint stock company (JSC) with Nesli DSC, [b]satisfactory complition of the US$ 1.9 million prototyp facility in Mersin and submission of a detailed business plan to TKB.Und damit fällt die Entscheidung wohl frühestens Ende 2016 --- bis dahin kann noch viel geschehen --- aber Nesli wird Dyesol schon im Nacken sitze.
Und warum erst Ende 2016?
Dazu hat Dyesol ja im letzten Quartalsbericht genauere Angaben gemacht. Der prototyp soll in 12 - 18 Monaten kommen. Aus der Erfahrung heruas sind dann eher 18 Monate anzunehmen, also Ende 2016.
|
Wertung | Antworten | Thema | Verfasser | letzter Verfasser | letzter Beitrag | |
11 | Greatcell Solar Verlustrealisierung - Aktientausch | douglas_h | douglas_h | 25.04.21 10:54 | ||
3![]() | 296 | GREATCELL SOLAR, jetzt erst recht! | 24dan | SonneMW | 25.04.21 03:20 | |
46![]() | 12.742 | Dyesol LTD, es geht weiter ! | Boersenharry | Fortunato69 | 25.04.21 02:20 | |
7 | DYESOL - Wieviel Aktien halltet Ihr? 07_2014 | Steff23 | chinasky | 25.04.21 01:51 | ||
18 | DYESOL - Wieviele Aktien haltet Ihr? 09_2014 | Steff23 | Steff23 | 25.04.21 01:27 |