Faszinierend - Maximus Ventures 900922

0,60 CAD   =   0,375326 EUR

0,65 CAD   =   0,406781 EUR

0,65 CAD =   0,406044 EUR

das ist richtig:

0,63 CAD   =   0,395048 EUR

In addition, hole #35 cut 0.7 meter of pyritized sediments grading 7.2 g/t gold. This intersection represents a new zone south of the carbonate and flow-type mineralization and will be subject to further investigation as the drilling program progresses. "We are very happy that the drilling consistently hits the carbonate-type mineralization at Bear Lake" stated Francois Viens, President and CEO of Maximus. "We have adjusted the program to target the flow-type mineralization that consistently demonstrated the best continuity and gold grade at the historic Kerr-Addison Mine."

Highlights of recent results are tabulated below and complete results are presented in attached Table 1

The Highlights of recent drilling results are available at the following address: media3.marketwire.com/docs/...ghts_recent_drilling_results.pdf

At Bear Lake, most of the drill intercepts to date are in the carbonate-type mineralization. Three deeper holes targeting the flow-type mineralization below 700 meters vertical were abandoned before reaching their target (e.g. holes #42A, #43 and #44) due to the presence of a strongly altered shear zone located approximately half way between the carbonate-type and flow-type mineralized zones. At the now-closed Kerr Addison mine located 5 kilometers east of Bear Lake, the flow-ore, which produced 60% of the gold, yielded higher and more consistent gold grades than the carbonate-ore which constituted only 40% of the total production. Considering the significance of the flow-type mineralization in the exploration model at Bear Lake, the drilling program has been adjusted so that holes designed to test the Bear Lake gold zones below 700 meters vertical are drilled from south to north, in order to intersect the flow-type mineralization before intersecting the shear zone.

Project Update

Three drill rigs are currently active at Larder Lake. Of the budgeted 43,000-meter drilling program proposed for Larder Lake in 2008, a total of 19,500 meters of diamond drilling has been completed to date in 39 holes. The drilling program will continue to systematically test the Bear Lake gold zone along strike and down-plunge to a vertical depth of 1,000 meters, using a 125 meter to 150 meter hole spacing. The 2008 drilling program will also test other promising gold targets on the Larder Lake Property. These targets are all located within the same rock units that host most of the gold occurrences along the Cadillac-Larder Lake Break, including the historic Kerr-Addison mine. To date, approximately 5% of all the samples submitted to the laboratory for assaying are still outstanding.

Larder Lake Property

Maximus is conducting the drilling program pursuant to the Option and Joint Venture Agreement between Maximus and NFX, whereby Maximus has the right to earn a 60% interest in NFX's 100% interest in the Cheminis, Fernland and Bear Lake claims and 45% interest in NFX's 100% owned Barber Larder claims, by expending $6 million on exploration by December 31, 2008. On July 4, 2008, Maximus notified NFX that it has met its $6 million expenditure commitment. Subject to NFX's review of the notice and documentation submitted with it, Maximus will be deemed to have earned a 60% and 45% undivided interest in the properties as described above.

NFX-Maximus Merger

On June 13, 2008, Maximus and NFX announced that they have entered into an agreement to combine the two companies on the basis of one (1) NFX share for each one (1) Maximus share. Based on the share exchange ratio, the Maximus and NFX shareholders will own approximately 58% and 42%, respectively, of the combined common shares outstanding. Completion of the transaction is subject to usual terms and conditions for such a transaction, including completion of due diligence, completion and execution of definitive business combination documentation, receipt of opinions from qualified investment dealers that the transaction is fair to the shareholders of NFX and Maximus, receipt of all required regulatory and securityholder approvals and no material adverse changes occurring in the financial condition of either company.

Quality Assurance and Control

As part of its QA/QC program, Maximus carried out check assays on the high-grade intersections with no discrepancies found in the assay results. The assays reported are the uncut average grades of all determinations from the same samples. The analytical method for gold is one (1) assay-ton fire assay, with gravimetric finish on all samples. All assays reporting over 2 g/t Au are automatically re-checked using the rejects. Assaying was done at Laboratoire Expert in Rouyn-Noranda, Quebec and at Polymet Labs in Cobalt, Ontario. The quality control process includes inserting blank samples and certified standards within each batch sent to the laboratory.

Qualified Person

The technical content of the information contained in this news release was reviewed and approved by Mr. Bernard Boily, P. Geo., Maximus' Vice President of Exploration. Mr. Boily is responsible for supervising the drilling program and is a qualified person under National Instrument 43-101.

Forward-looking Statements

This news release contains certain "forward-looking statements". All statements, other than statements of historical fact, that address activities, events or developments that Maximus and NFX believes, expects or anticipates will or may occur in the future, are forward-looking statements. These forward-looking statements reflect the current internal projections, expectations or beliefs of management of Maximus and NFX based on information currently available to them. Forward-looking statements are subject to a number of known and unknown risks and uncertainties beyond Maximus and NFX's control including uncertainties related to the completion of the proposed business combination, potential mineralization, exploration results, completion of work program, and availability of equipment necessary for the drilling program and future plans and objectives of the companies. Resource exploration, development and operations are highly speculative, characterized by a number of significant risks, which even a combination of careful evaluation, experience and knowledge may not eliminate, including, among other things, unprofitable efforts resulting not only from the failure to discover mineral resources but from finding mineral deposits which, though present, are insufficient in quantity and quality to return a profit from production. There can be no assurance that such statements will prove to be accurate and actual results could differ materially from those suggested by these forward-looking statements for various reasons discussed from time to time in filings made by the companies with securities regulatory authorities. All forward-looking statements herein are qualified by this cautionary statement. Accordingly, readers should not place undue reliance on forward-looking statements. Maximus and NFX undertakes no obligation to update publicly or otherwise revise any forward-looking statements, except as may be required by law.

Table 1 (Larder Lake Assay Results - Bear Lake Area) is available at the following address: media3.marketwire.com/docs/...lake_assay_results_bear_lake.pdf

Larder Lake Property Plan View, Bear Lake Area Longitudinal Section - Carbonate-type Mineralization Map and Bear Lake Area Longitudinal Section - Flow-type Mineralization Map are available at the following address: media3.marketwire.com/docs/ImageMap_0709.pdf

sonst wäre der Trend im Arsch!!!

0,60 CAD   =   0,377328 EUR

Nun zu den beiden vermeintlich intressanten Löchern 35 und 44. Diese hatten wir in den letzten News schon gesehen, allerdings nur zum Teil, die beiden Löcher kennen wir bisher wie folgt:

http://www.ximg.de/p/1383f794483662f4c465e8f1291eba7f.png

http://www.ximg.de/p/bdbaad19221db53eb4e27a870752a9ea.png

Nun kam also von der neuen News noch dies hier hinzu:

http://www.ximg.de/p/738ff5bd1fdfb983c2da914bb5d0210d.png

Erinnert ihr euch an folgende Präsentationsfolie, vom Juni 2008:

http://www.ximg.de/p/6d0bf41e8210fda541c455f987cbcfe2.png

http://www.maximusventures.com/i/pdf/MXV-Presentation-June-0…


Die leichten Erweiterungen der beiden Löcher 35 und 44 sind als meiner Meinung nach wie folgt:

-> Die flow-type Zone hat Loch 44 noch immer nicht erreicht, da das Loch einfach noch zu kurz ist! Die wichtigen Strecken von Loch 44 hatten wir bereits in den vergangenen News schon gesehen!

Fazit zu Loch 44:

Die aktuellen Ergebnisse von Loch 44 sind also nichts weiter als ein Lückenfüller weil man ja als taktischen Gründen News präsentieren muss bei solch einem agressiven Bohrprogramm!


-> Achten auch mal genau auf die Position von Loch 35! Die schon bekannten Ergebnisse hatte die geniale Goldgrade schon erreicht, und zwar in der Flow-type Mineralisierung, also dem Sahnsestückchen! Was haben wir nun neu zu Gesicht bekommen:

Die Flow-Type Mineralisierung ist größer wie vermutet! Paar Meter weiter hinten findet sich immer noch Gold!

Fazit zu Loch 35:

Eigentlich gut, denn die Mineraliserung die wir schon kannten wurde noch etwas breiter!


Und was haben wir noch bekommen:

http://www.ximg.de/p/1b8b4be4f7b7b58cfbd88c23b8f6142f.png

Loch 45 ist im selben Erzkörper wie auch Loch 44, siehe obige Präsentation, Folie 11!

Somit wurde auch dieser Erzkörper von der größe bestätigt. Die Goldgrade sind zwar nicht der absolute bringer, aber es kommt auf die Feinheiten drauf an:

-> Flow-Type (erwünschte Zone, siehe Kerr-Mine)
-> Und eben die Erzgröße bestätigt



Und nun verwirrt

Achso! Das wars etwa schon?


Jetzt stell ich mir folgende Frage:

Aus der Präsentation, die wir im Juni 08 gesehen haben wird ersichtlich, dass bis dato ca. 16,4km gedrilled wurde!

Aus gestriger News wird ersichtlich dass bis heute 19,5km gedrilld wurden!


Also haben die Jungs in über einem Monate gerade mal 3km gedrilled?
Und davon haben sie uns 1 Bohrloch präsentiert, also tut mir leid, ich muss hier mal:

lachen lachen



Um es kurz zu machen, hier sieht doch sogar ein Blinder was gespielt wird, oder nicht:

-> 3km in 1 Monaten drillen mit 3 drill-rigs, ist ne Lachnummer!

-> Davor wurden 16km in 3 Monaten gedrilled: 5km pro Monat!

Aber wie man ja aus der News sehen kann, wird nun folgendes geändert:

"We are very happy that the drilling consistently hits the carbonate-type mineralization at Bear Lake" stated Francois Viens, President and CEO of Maximus. "We have adjusted the program to target the flow-type mineralization that consistently demonstrated the best continuity and gold grade at the historic Kerr-Addison Mine."

Ab jetzt wird das Bohrprogramm angepasst und wirklich die intressanten Zonen angebohrt, daher denke ich wie folgt:

Die aktuell präsentierte hälfte des Bohrprogramms ging es darum, die Zonen zu lokalisierung. Nun müssen endlich mal die intressanten Goldzonen angebdohrt werde - denn bald kommt die Res.Schätzung!


Aber anderseits auch logisch, denn was wäre klüger als wenn man die neue Firma nicht so präsentieren könnte:

-> gute BE's
-> kurz darauf Res.Schätzung mit über 2 Mio Unzen!

übrigens sind mit aktuellen Niveau die 2 Mio Unzen eigentlich so gut wie sicher - mit 2 Mio Unzen sind wir, was die Region LL betrifft noch erheblich Unterbewertet.. Und wir sprechen hier nur von BearLake!
Aber inoffizielle Stimmen gehen ja von 4-6 mio UNzen aus, da muss noch einiges an guten BE's kommen!

Die Intressanten Zonen kommen erst noch!


Daher ein Fazit der News von gestern:

Maximus is conducting the drilling program pursuant to the Option and Joint Venture Agreement between Maximus and NFX, whereby Maximus has the right to earn a 60% interest in NFX's 100% interest in the Cheminis, Fernland and Bear Lake claims and 45% interest in NFX's 100% owned Barber Larder claims, by expending $6 million on exploration by December 31, 2008. On July 4, 2008, Maximus notified NFX that it has met its $6 million expenditure commitment. Subject to NFX's review of the notice and documentation submitted with it, Maximus will be deemed to have earned a 60% and 45% undivided interest in the properties as described above.


Maximus ist nun offiziell Besitzer von 60% der LL und 45% der Barber Larder Liegenschaften!

Der Rest der News war ok, aber eigentlich völlig unwichtig, wenn man sie mal genau auseinandernimmt Zwinkern

Denke bis zur Fusion wird nun weiter gesammelt von den großen Jungs in Canada!

0,50 CAD   =   0,314095 EUR

http://media3.marketwire.com/docs/ImageMap_0709.pdf

Unity has drills on the way, possibly arriving next week. Unity doesn't get the recognition it deserves imo.

The merged company has enough cash to complete this year and maybe a little into next year. Then there are the .40 cent warrants, which could generate an additional $4 million.

A resource estimate for the Larder Lake project should be completed around the end of the year, (Cheminis and Bear Lake) as planned. Patience, GLTA

http://www.stockhouse.com/Bullboards/MessageDetail.aspx?p=0&…


Also dieses Posting ist wirklich intressant!

Denn:

-> Wie gestern gestern war doch das Loch 44 einfach zu kurz um die beliebte Flow-type Mineralisierung zu erreichen! Nun wurden 2 neue Löcher gebohrt - 47 und 49 -, welche entgegengesetzt von 44 und 43 gebohrt wurden um diese Zone zu erreichen, hier hab ich mal ein Bild gemacht, wie die beiden Löcher aussehen sollten:

http://www.ximg.de/p/d7af493430d693ae31285aaf72ec876f.png

http://www.ximg.de/p/d7af493430d693ae31285aaf72ec876f.png

Somit müssten die beiden Löcher 47 und 49 wieder sehr gute Results liefern!!

-> Loch 10 und 42A sind nun auch im Labor. Scheinbar hat das Labor versprochen die Ergebnisse pünktlich zu liefern. Also in 1-2 weeks neue results!

-> Loch 50 ist ebenfalls aktuell im machen. Dieses Loch soll die (in der letzte News gefundene) neue, 4. Gold-Zone bestätigen

-> Loch 47, 49 und 50 sollten spätestens Ende Juli fertig sein und dann ins Labor kommen!

-> Daher sollten wir noch 2 Drilling-News bekommen, bevor die Fusion abgeschlossen ist!

-> Ebenfalls ist die Bohrmaschine nun zu Unity aufgebrochen!! Diese sollte nächste Woche beginnen zu drillen!

-> Die neue Firma hat scheinbar genügend Cash um die Aktivitäten von diesem Jahr und den Beginn von 2009 durchzuzihen, Warrants sollen ebenfalls bis zu 4 mio CAD bringen!

-> Die Res.Schätzung soll Ende 2008 für BearLake und Cheminis fertig sein!!!!



Mein Fazit:

Ein Teil davon wussten wir ja schon, aber demnach sollten wir diesen Monate nochmals ne News bekommen und auch nächsten nochmals eine. Dieses mal hoffentlich mit intressanteren Drillings!!

Hört sich doch intressant an, auch Unity wird nun begonnen.


Viele Grüße
czujackh

wieder von einer Hotline kommen!?

13:28:19   0,315   15.983
12:51:31 0,305   14.000
12:31:56 0,308   3.000
12:23:46 0,29   1.500
12:23:23 0,305   15.700
12:22:17 0,315   45.500
12:18:14 0,32   12.000
10:15:09 0,323   7.430
09:25:08 0,316   10.000
09:24:53 0,317   619
09:24:46 0,32   6.000

0,50 CAD   =   0,311021 EUR

Schönes WE

mal andersrum dann kommts der Sache schon näher. :)

A striking feature of this project is the extent of the gold-rich narrow quartz vein system. While individual veins range from few centimetres to often over 1 metre in thickness, they can be traced for hundreds to thousands of meters along strike and occur over an area of over 4 square kilometres. The veins are locally very high-grade and are reported to have locally-yielded grades of up to several hundred ounces of gold per tonne. However, production grades were generally recorded at 30 to 150 grams per tonne (1 to 5 ounces per ton) according to historic information (John C. Reed, 1937; Geology and Ore Deposits of the Warren Mining District, Idaho County, Idaho). Over 1.2 million ounces of gold was historically produced from the area, both from underground and alluvial operations. Maximus believes that there is excellent potential to develop resources both in previously-mined veins and in veins that are yet to be explored by diamond drilling.

To date, 41 different gold-bearing quartz veins have been identified on the property, of which the Rescue, the Little Giant and the Charity are three of the 18 better-known veins and supplied most of the reported historic gold production. These veins are still open laterally and down-dip and, with limited exploration and development work, their extensions could potentially be mined again from an existing 1,600m long adit.

No previous drilling has been recorded on the property and all previous exploration efforts were conducted using trenching and underground drifting along the veins. There are strong geological indications that significant mineralization remains in place along the three principal veins already exposed by old workings (either laterally or down-dip). Furthermore, many other gold-bearing quartz veins, parallel to or intersecting the main veins remain, to be explored.

Unity Property

Maximus, through its wholly-owned US subsidiary, Walker Lane Gold LLC (Walker), can earn a 60% joint venture interest from Unity GoldSilver Mines Inc. by spending US$1.0 million in exploration and development work on the property and by completing a positive feasibility study on or before November 30, 2010. The property located in Township 22N, Idaho County, Idaho consists of 8 patented claims and 51 leased (staked) claims covering 420 hectares. The objective of the work program planned for Unity is to complete, as soon as possible, a feasibility study to evaluate the economic viability of reopening the Unity gold mine.

Qualified Person

The technical content of the information contained in this news release was reviewed and approved by Mr. Bernard Boily, P. Geo., and Maximus' Vice President of Exploration. Mr. Boily is responsible for supervising the drilling program and is a qualified person under National Instrument 43-101.

Forward-looking Statements

This news release contains certain "forward-looking statements". All statements, other than statements of historical fact, that address activities, events or developments that Maximus believes, expects or anticipates will or may occur in the future, are forward-looking statements. These forward-looking statements reflect the current internal projections, expectations or beliefs of management of Maximus based on information currently available to it. Forward-looking statements are subject to a number of known and unknown risks and uncertainties beyond Maximus' control including uncertainties related to the exploration program, potential mineralization, exploration results, completion of work program, and availability of equipment necessary for the drilling program and future plans and objectives of Maximus. Resource exploration, development and operations are highly speculative, characterized by a number of significant risks, which even a combination of careful evaluation, experience and knowledge may not eliminate, including, among other things, unprofitable efforts resulting not only from the failure to discover mineral resources but from finding mineral deposits which, though present, are insufficient in quantity and quality to return a profit from production. There can be no assurance that such statements will prove to be accurate and actual results could differ materially from those suggested by these forward-looking statements. All forward-looking statements herein are qualified by this cautionary statement. Accordingly, readers should not place undue reliance on forward-looking statements. Maximus undertakes no obligation to update publicly or otherwise revise any forward-looking statements, except as may be required by law.

The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this release.